HOME OF THE HYBRID KIT        

SG-1


Mods known to be compatible with the SG-1 kit include

-Sigelei #8,13,19

 

Atomizers known to be compatible include

-RSST

-AGA

-Richman

-Did Clones

-Terminators

-AGI  *Genesis mode only

 

*Please do not use any atomizer if it is leaking juice out of the 510

 

Although other mods and atomizers may work with the SG-1 kit, only those listed above have been confirmed to work by Fusions

RSST-TCI


-Top cap insert for the RSST atomizer.

-Reducing the amount of air in the chamber gives a warmer and more flavorful vape.


-Simply align air hole and press in

-No altering required

NEM-1 


-Turns your Nemesis into a Hybrid
-Better performance with a cleaner look
-Works with all editions of the Nemesis (including properly threaded clones ) Caution some Hcigar clones use 21x.5 threads.These work with 20.5 x .5 Nemesis only
-Works with 18350,18500,and 18650 battery configurations
-Works with any 510 threaded atomizer with an adjustable center pin

-Use care not to cross thread due to the fine threading also make sure your mod is free of burs (especially copper versions)

Kit includes
-1 Aluminum 510 threaded adapter
-1 Battery spacer with SS contacts (2 sizes for multiple battery and tube configurations)
-1 Delrin insulating washer
-3 o-rings ( 3 sizes for multiple atomizer center pin adjustments)

​FM-201

-Turns your 20x1 threaded mod into a hybrid

-Better performance with a cleaner look

-Works with multiple mods and battery configurations

-Works with any 510 threaded atomizer with adjustable center pin


Kit includes

-1 Aluminum  20x1 / 510 threaded adapter

-1 battery spacer

-1 delrin insulating washer

-4 o-rings

-spacer pins 1/8',3/16"1/4",5/16"

Nem-Magnets

                         

-smoother switch action

-lighter touch to activate

-no springs to wear out

-long lasting


-Turns your 21x1 threaded Chi-You , Hammer ,or Astro mod into a Hybrid

​-Better performance with a cleaner look

​-Works with properly threaded clones in all battery configurations

​-Works with any 510 threaded atomizer with an adjustable center pin

​-Can be made to work with other 21x1 threaded mods

​                          

Kit Includes

​-1 Aluminum 21x1 / 510 threaded adapter

​-1 Adjustable battery spacer with adjustment ring

​-2 Brass battery spacer pins 3/16" and 1/4"

​-4 small o-rings for atomizer pin adjustments

​HY-CHI

-Turns your ZEN 2 or ZNA mod into a Hybrid

​-Better performance with a cleaner look

​-Works  in all battery configurations

​-Works with any 510 threaded atomizer with an adjustable center pin (ZNA only works with attys up to 

22mm diameter)

 

​                          

Kit Includes

​-1 Aluminum ZEN 2 510 threaded adapter

​-1 Adjustable battery spacer  

​-2 Brass battery spacer pins 3/16" and 1/4"

​-3 small o-rings for atomizer pin adjustments

-1 insulating washer

​-2 small magnet spacers

​Z-1

​ST/R

-Turns your 20x.5 threaded BRASS Stingray mod into a Hybrid Original Copper and LE versions EXCLUDED. JDTECH does make an adapter for these versions.Has been reported to work with Copper and LE clones (mine included) but do so at your own risk

​-Better performance with a cleaner look

​-Works  in all battery configurations

​-Works with any 510 threaded atomizer with an adjustable center pin 

 -Use care not to cross thread due to the fine threads also make sure mods threading is free of burs 

​                          

Kit Includes

​-1 Aluminum 510 threaded adapter

-1 Insulating washer

-3 small o-rings for atomizer center pin adjusting

​-1 small magnet spacer (Just in case you need it)